ZunTzu

Posted: **09 Oct 2007, 09:15**

Hi.

<counter-sheet name="Cards" 
   front-image-file="FrontCards.jpg"
   front-resolution="300 dpi" 
   back-image-file="BackCards.jpg" 
   back-resolution="72 dpi">
	
      <card-section rows="3" columns="3"
            face-left="41" face-top="42" face-right="554" face-bottom="807"
            back-left="212" back-top="42" back-right="383" back-bottom="297" />

</counter-sheet>

Is there an error?

The back image file is not loaded.
The back side of cards is extracted from the same FrontCards.jpg file.
Thank you in advance.

Posted: **09 Oct 2007, 09:45**

Hi, rifo!

By default the back of the cards is extracted from the front image.
To tell ZunTzu to use the back image for the back of the cards just add this line before the line beginning with "face-left":

Code: Select all

type="CardFacesOnFrontBackOnOtherSide"

Posted: **09 Oct 2007, 10:53**

It works (obviously...)!
Thank you again!

Rifo

P.S. We are using zuntzu installed in our notebook via LAN, in order to playtest our prototypes...
...very useful !

Posted: **09 Oct 2007, 13:46**

rifo wrote:We are using zuntzu installed in our notebook via LAN, in order to playtest our prototypes...
...very useful !

That's great!
I'm considering adding features that would improve prototyping, such as the ability to modify a scenario at runtime (with all players seeing the changes) and to mix components from several game boxes (also useful for games with errata, variants, extensions, army lists, ...).

Posted: **12 Oct 2007, 12:00**

ZunTzu

front & back image files in separate files

front & back image files in separate files

Re: front & back image files in separate files